Rugged, reliable performance and superior arc characteristics.
Hot Start and built-in arc control.
Enclosed circuit board.
Thermal overload protection with light.
Fan – On- Demand.
15 A, 115 VAC duplex receptacle.
Power efficient.
Remote control capability.
Optional digital volt and amp meters.
Unit provides maximum flexibility by automatically connecting to any input power while maintaining the best DC Stick welding performance in its product class.Maxstar_200_STR
Auto-Line™ provides state-of-the-art flexibility by automatically connecting to 120-460 VAC, single- or three- phase power without removing the covers to relink the power source.
Low OCV Stick reduces open-circuit voltage to 9-14 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.
Superior Stick arc performance on all input voltages. Even on the difficult to run electrodes like E6010.
Portable in shop or at job site – at 14.5 kgs the Maxstar 200 STR is easily moved from location to location.
Lift Arc™ start for TIG arc starts without the use of high frequency.
Adaptive Hot Start™ for Stick arc starts automatically increases output amperage at start of weld should the start require it. Prevents electrode from sticking and creating an inclusion.
Fan-On-Demand™ operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine.
Wind Tunnel Technology™ Internal air flow that protects electrical components and PC boards from dirt, dust, debris… greatly improving reliability.
LVC™ Line Voltage Compensation Keeps output of the power source constant regardless of fluctuation in input power ± 10%
Stick/Arc welding machines supplied by us are lightweight, portable, cost effective with excellent performance. Our clients can avail these machines as per their requirement at reasonable price.
Durable and Light Weight Power source ideal for upto 5mm Stick Electrodes and TIG Welding of Pipe and Plate
Autoline Allows for any input voltage hook-up with no manual linking, providing convenience in any job [miller-maxstar]
setting.
Blue Lightning high-frequency arc starter for more consistent non-contact starts and greater reliability compared to traditional HF arc starters.
Lift-Arc start provides TIG arc starting without the use of high frequency.
Hot Start adaptive control provides positive Stick arc starts without sticking.
Fan-On-Demand cooling system only operates when needed to reduce noise, energy use and contaminants pulled through the machine.
Auto-postflow calculates the length of postflow time based on the amperage setting. Eliminates need to independently set postflow time.
The world’s first and most reliable conventional squarewave TIG power source.
Squarewave output with AC balance control features adjustable penetration and cleaning action while increasing arc stability on various aluminum alloys, and helps eliminate tungsten and arc rectification.
120 V auxiliary power receptacle for cooling system or small tools.
Syncro StartTM technology for customized arc starts. Allows more precise arc starts and fine-tuning base on tungsten diameter and material thickness.
CoolmateTM 3X cooler (shown in complete Packages). Three – gallon cooling system features a flow indicator to visually indicate systems is working and an external filter to stop objects from entering the water- cooled torch cable.
Last procedure recall automatically recalls the last procedure set-up when switching polarity.
HF arc starting provides non- contact arc starting that eliminates tungsten or material contamination.
Dual digital meters allow for quick and easy viewing of actual and preset values of amperage and voltage.
Postflow protects the weld end zone and electrode. (Syncrowave 200 has auto- postflow which calculates the length of postflow time based on the amperage setting. Syncrowave 250/350 has adjustable postflow which has to be set independently.)
Line voltage compensation keeps power source constant regardless of fluctuations in input power (±10 percent).
Lift- ArcTM provides Dc arc starting without the use of high frequency.
Built-in consumable storage drawer located on front panel for easy access.
Raising the bar for industrial-class wire feeders with the traditional features, plus enhanced flexibility provided by features such as trigger hold, dual tension control, automatic run-in, and toolless rotatable drive.
Tool-less rotatable drive assembly allows operator to rotate the drive housing, eliminating severe bends in the wire feed path which reduce gun liner life. Also aids in feeding difficult wires.
Automatic run-in control significantly improves arc starts. Run-in can be independently set on the DX model.
Trigger hold allows operator to make long welds without having to hold the trigger continuously. Reduces operator fatigue.
100% duty cycle industrial power sources deliver time-tested, reliable performance in semiautomatic applications for a variety of industries.
Superior arc welding performance with MIG welding
Line voltage compensation ensures consistent weld performance by keeping output power constant even if primary input power varies by ±10%
Thermal overload protection light indicates power shutdown. Helps prevent machine damage if the duty cycle is exceeded or airflow is blocked
Power efficient for exceptional value and return on your investment.
Two positive output terminals provide high/low stabilizer selection. Allows operator to optimize arc performance
14-pin receptacle provides quick, direct connection to Miller 14-pin wire feeders and accessories.
Description / Specification of Invision Mpa Series
We are involved in offering a wide range of Invision Mpa Series to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Invision Mpa Series. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
Outstanding multiprocess inverters with built-in features providing the ultimate in productivity.
Wind Tunnel Technology protects electrical components and PC boards from contamination.
Fan-On-Demand cooling system operates only when needed, reducing noise, energy use and amount of contaminants pulled through machine.
Lift-Arc allows TIG starting without use of high-frequency. Starts the arc without contaminating weld with tungsten.
Adaptive Hot Start increases the output amperage at the start of a weld if necessary, eliminating electrode sticking.
Inverter arc control technology provides greater puddle control for superior 6010 Stick electrode performance.
Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight.
Low OCV Stick — A built-in, selectable feature, that reduces the Stick mode open-circuit voltage (OCV) to nearly 15 volts when the welding power source is not in use. Eliminates the need for add-on voltage reducers.
Large, dual digital meters are easy to view and presettable to ease setting weld output.
Process selector switch reduces the number of control setup combinations without reducing any features.
Miller’s Dimension Series of the three-phased, CC/CV DC power sources provide outstanding versatility, plus the endurance to handle demanding industrial applications. Engineered to provide exceptional performance across a variety of arc welding processes.
[Miller Dimension Series] DC multiprocess versatility with excellent arc performance.
Digital meters for presetting or monitoring voltage or
amperage.
Line voltage compensation for input voltage variations.
15-amp, 115-VAC duplex receptacle for auxiliary tools
Hot Start makes it easier to start difficult stick electrodes.
Arc control for added flexibility in tight stick locations.
Power efficiency for exceptional return on your investment.
Miller Spectrum Plasma Cutting systems pack extreme power into small portable packages for sheet metal to 7/8” mild steel for body shop, maintainance, light fabrication applications. Plasma cutting provides the following benefits
Cuts any type of electrically conductive metals including aluminum, copper, brass and stainless steel
Does not require pre-heat cycle
Produces a narrow heat affected zone which prevents warping
Provides gouging capabilities
Miller’s Subarc Series are three-phase, CC/CV DC power sources designed to provide a superior arc for the SAW welding process. Also available in square wave AC/DC powersources for thick structures, cladding overlays etc. [Sub Arc Series]
Easier setup and operation – The improved user interface of the Subarc Series makes setting up and operating the power source relatively simple. The operator is presented only with the necessary functions to set process and control output.
Greater control of deposition, penetration, and heat input. Miller SAW solutions are designed to deposit large amounts of filler material and achieve deep penetration on thick or large surface area weldments.
Multi-arc capable. AC welding output enables the Subarc AC/DC to be used in tandem arc welding systems with a DC lead arc and AC trailing arc, or with AC / AC arc combinations. Using multiple arcs further increases deposition rate, resulting in shorter welding cycles for very thick weldments without compromising quality
Part of a customized system. Miller power
A complete multiprocess and multioperator welder/generator in one rugged package. up to 400 amps of output per operator can be paralleled with a single switch to provide up to 800 amps of power.
Two independent pipe quality arcs in one compact package.
Two independent generators provide up to 32,000 watts of power.
Multiprocess CC/CV capability provides independent operators controls and the best Stick, MIG, Flux- Cored and TIG Performance available with no interaction.
Independent remote control connections allow the use of standard and wireless volt / amperage control devices for each operator.
Quiet operation. At just 68 dB at idle or 76 db at 23 feet (7 m) at full load, it’s quieter than many single- operator models, improving jobsite communication and safety.
A TIG Welding system that blitzes traditional welding speeds, uses no filler material or edge preparation up to 16mm thickness in Titanium and reduces consumables to a fraction of the cost. Also is fully automated, for perfect welds of superior quality, with limited operator experience. Keyhole TIG is a commercial reality now and is available with us!
[K-TIG Welding system] Keyhole TIG welding is a game changer! Keyhole TIG (K-TIG) welding is a revolutionary technology that eliminates the constraints and inefficiencies of traditional TIG (Tungsten Inert Gas) welding.
K-TIG provides a TIG Welding system which:
Is 10x to 100x faster than TIG
Delivers weld quality which meets the most demanding requirements of the nuclear, aerospace & defence industries;
Welds in a single, full penetration pass & requires no filler or edge preparation;
Reduces power consumption by up to 95%;
Reduces gas consumption by up to 95%;
Eliminates the need for skilled labour;
Dramatically improves OH&S conditions;
Is fully automated;
Description / Specification of Torches
We are involved in offering a wide range of Torches to our most valued clients. Our range of these are widely appreciated by our clients which are situated all round the nation. We offer our range of it at most affordable prices.
We introduce ourselves as an eminent trader and supplier of an extensive array of Torches. Prior to dispatch, our quality controllers run numerous tests on the entire range on various parameters of quality and durability. The offered equipment is manufactured using superior quality components with the aid of sophisticated techniques at the vendors' end. Moreover, our precious clients can purchase it in different technical specifications at reasonable price from us within promised time frame.
Features:
Sturdy design
Highly durable
Application specific design
nduction Heat Systems to solve Ongoing Preheating & Stress Relieving Problems
ProHeat 35 Induction Heat System is simple and cost-effective heating process that can be applied in the following applications to deliver fast and consistent heat:
[proheat] Welding fabrication and construction;
Preheating of welds;
Post-weld heat treatment;
Coating removal; and
Shrink Fit.
Maintaining a consistent position of the torch over the weld joint is absolutely critical for automated welding. Tactile seam tracking employs an electromechanical probe that is mounted ahead of the torch. The probe has a tip that rides in the weld joint and when deflected causes the motorized slides to respond vertically or horizontally. The tactile seam tracker can be used to initially find the weld joint, then track the joint while welding, and retract the torch up and away from the part at weld completion.
The Arc Voltage Control maintains precise arc length by controlling arc voltage thus assuring high quality welds time after time on AC or DC applications. The control measures arc voltage and compares the measurements to the operator setting. It maintains the set arc length by moving the torch up or down as required via a motorized slide.
The HWP-50D Hot Wire Process is used where high deposition rates, combined with high quality are needed. Used with the GTAW or PAW welding process, the wire is electrically preheated before it enters the weld pool. The system can be used for the surfacing or the joining of ferrous and non ferrous alloys
The Little Torch has unmatched flexibility – it can be used with several fuels including acetylene, hydrogen, propane or natural gas. It produces a perfectly controlled, completely stable flame hot enough to melt commercially weldable metals, glass and even ceramics. It may also be used with special heating tips to melt up to 3 oz. of gold or silver. Excellent for soldering platinum.
Smith’s HB1500 series single stage regulators and Series 30 double stage regulators comprise of complete line of versatile regulators for welding, cutting, heating and other industrial applications. Heavy duty construction and simplified design provides high gas flow and longer trouble-free operation.
quasol® purge paper is used to dam Argon or Helium gases during Tungsten Inert Gas (TIG) welding of stainless steel and aluminum pipes. The greatest advantage of Aquasol® water- soluble purge dams is that they can be placed in close proximity to a weld zone, then dissolved with water or steam introduced through the pipe.
I-Purge™ Modular Inflatable Bladder System, the most advanced and versatile solution for pipe purging, enables to accomplish a number of different purge requirements with one interchangeable solution. It is equipped with Quick Connect Fittings, components easily snap on and off in seconds! With the Isolator™ Adaptor Kit, a one sided plug can be created to close off the end of a pipe for servicing, cleaning, inspection or sealing. The Proprietary Relief Valve Technology enables the system to inflate at a precise rate. I-Purge Modular Systems are available in sizes 2 – 36 (51 – 914 mm) and can be customized to suit your specific purging requirement.
[Pro-Ox-100] The “Pro OX® -100 Kit” is a durable, battery powered instrument that accurately measures oxygen concentration with 0.1%(1000ppm) with 0.01%(100ppm)resolution. The “Pro OX® -100 Kit” Kit is ideally suited for high purity welding where evacuation of oxygen is paramount. Prior to welding, the pipe will be pre-purged to displace oxygen with an inert gas. Constant monitoring of the oxygen level is necessary until it is ascertained that the oxygen has been evacuated to 0.1%(1000ppm) with 0.01%(100ppm) to enable the commencement of welding to prevent oxidation, discoloration and coking. The “Pro OX® -100 Kit” accurately measures low concentrations of oxygen in purged tubing and high purity weldments, ensuring a high quality finish.
Aquasol PRO OX-100
:The Minitherm torch range has been developed to meet the need of trade and industry for a small injector torch to handle special jobs.
::Various torch inserts from micro fine applications to powerful heating, welding and soldering work
::High safety levels due to injector suction principle
::Work without fatigue due to low weight
::Optimum freedom of movement due to compact size
[minitherm-4] ::Can be used with all gasses
